FACTS --One-third of home Christmas tree fires are caused by electrical problems. --Each year, fire departments respond to roughly 260 structure fires caused by Christmas trees. --A heat source too close to the tree causes one in every five of the fires. PICKING THE TREE --Choose a tree with fresh, green needles that do not fall off when touched. PLACING THE TREE --Before placing the tree in the stand, cut 1-2 inches from the base of the trunk. --Make sure the tree is at least three feet away from any heat source, like fireplaces, radiators, candles, heat vents, or lights. --Make sure the tree is not blocking an exit. --Add water to the tree stand. Be sure to add water daily. LIGHTING THE TREE --Use lights that have the label of an independent testing laboratory. Some lights are only for indoor or outdoor use. --Replace any string of lights with worn or broken cords or loose bulb connections. Connect no more than three strands of mini string sets and maximum of 50 bulbs for screw-in bulbs. Read manufacturer's instructions for number of LED strands to connect. --Never use lit candles to decorate the tree. --Always turn off Christmas tree lights before leaving home or going to bed. AFTER CHRISTMAS --Get rid of the tree after Christmas or when it is dry. --Dried-out trees are a fire danger and should not be left in the home or garage, or placed outside against the home. --Check with your local community to find a recycling program. --Bring outdoor electrical lights inside after the holidays to prevent hazards and make them last longer. All infomation has been referenced from the NFPA Public Education Division. To view this site go to www.nfpa.org/education or click above on Departments, then Fire Department, then Useful Links, and then National Fire Protection Agency.